Computer routers will better your network

Sponsored Links:

So, how many of you use computer routers to help build a network? No, I’m not talking about the normal stuff like an ADSL router, I’m talking about using something a little bit more robust: That is, actually using a computer as a router. This isn’t usually done when building a small at-home network; this is something that’s usually done when creating large enterprise networks for large companies. You certainly can use a computer as a router on a smaller network (nobody is going to stop you!), but you usually don’t need that type of functionality and security on networks at home. If you choose to use it though, there’s nothing wrong with that.

So, why is a computer router a little bit more robust than the standard stuff you see at the store? That’s simple: You have the ability to actually use more robust software on a computer, unlike a typical cheaper router that may come with a configuration utility and basic firewall. No, with a computer you can install and use some really good packet filtering software, and configure it exactly how you like it. These are mostly Unix or Linux computers; Windows is not good for this sort of application, so I wouldn’t even try it.

Now, you really don’t need to go all-out here. Computer network routers are typically created with cheaper computers that don’t cost much to acquire and operate. You don’t need something with a dual core, here. Heck, many of these routers are run on simple 300 MHz machines, which can easily be bought for $50 on the used market. Don’t even worry about buying refurbished laptops or computers; the warranty doesn’t really matter. All that matters is that it can turn on and actually run a stable operating system. Typically loading up Linux or Unix will take care of the stability issue; as long as the computer will actually run for a period of time, you’re all set.

The best computer routers don’t have much to them. No USB interface, no real peripherals, and most of the time, not even a monitor. You really don’t need one. You can simply telnet or ssh into the router to do any configuration that you need. This is preferable; you don’t want this router to be bogged down with unnecessary stuff. All you need it to do is filter packets and that’s it. You can do that easily with something low-powered.

I don’t want to go into the rest of the technical information here; I just wanted to give you the basics before you start your project. Good luck!